elastic, strong, sandable, overpaintable, free of isocyanate and solvents
Under the brand WEICON Flex 310 M, a variety of high-quality adhesives and sealants is available. WEICON Flex 310 M are one-component products on an MS polymer basis. They are used for permanently elastic bonding and sealing of different materials to themselves or among each other.
Typical applications are in the fields of
- metalworking, tank and apparatus construction
- car body, vehicle, and freight container construction
- ventilation and air conditioning
- electrical industry
- yacht and ship building –
and in many areas of plastic technology.
WEICON Flex 310 M Classic
(previously Flex 310 M)
For versatile use. Very good adhesion without primer on aluminium, stainless steel and many other surfaces. Immediately overpaintable (wet-in-wet). Excellent aging and UV stability. Sandable after curing.
WEICON Flex 310 M Crystal
(previously Flex 290 M with improved formulation)
Crystal-clear after curing. Excellent adhesion on glass, PC*, PMMA* and acrylic glass. Therefore, especially suitable for elastic joints where the adhesive shall not or must not be visible.
* = only for tension-free bonding.
WEICON Flex 310 M Super-Tack
Very high initial strength. For metals, plastics and many other materials. In particular suitable for bonding on vertical surfaces, indoor and outdoor. Replaces screws, pegs, rivets, and other traditional fixings.
WEICON Flex 310 M HT 200
High temperature resistant. Very good adhesion on metal and most plastics. Allows bonding and sealing of parts before thermal coating (e.g. powder coating).
WEICON Flex 310 M Stainless Steel
Elastic one-component adhesive/sealant on the basis of a POP hybrid polymer. Flex 310 M Stainless Steel contains neither substances that disturb lacquer wettings (e. g. silicone) nor solvents or isocyanates.
Flex 310 M Stainless Steel has a high adhesion power and does not cause corrosion on sensitive surfaces. Therefore, it is particularly suitable as bonding agent or joint and seam sealant on stainless steel, aluminium and non-ferrous metals.
High elasticity, excellent adhesion on different materials and a good paintability** – these characteristics offer a variety of applications in industry. In addition, all types of WEICON Flex 310 M are neutral-curing, free of solvents and isocyanates as well as of substances that disturb lacquer wettings, e. g. silicone.